2 safe vehicle belt systems – Graco SnugRide 1778253 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE FOLLOWING BELT SYSTEMS CAN BE USED WITH YOUR
INFANT RESTRAINT, IF the seat location meets all other requirements
of these instructions and those in your vehicle owner's manual. LATCH
can be used in place of the vehicle belt system. Please refer to vehicle
owner’s manual for LATCH locations.
When using infant restraint without the base, adjust the belt as
described in this section for these types of vehicle seat belts.
Some vehicle lap/shoulder seat belts have a plastic button on the belt.
Do not allow the button to interfere with the belt routing through the
vehicle belt path when installing the seat alone or when installing the
seat and the base.
6.2.2 SAFE Vehicle Belt Systems
Lap Belts - Manually Adjusted
When buckled, the belt is
tightened manually by pulling on
the excess belt while pushing
down hard on the infant restraint.
30