To lengthen waist straps for a larger baby – Graco SnugRide 1778253 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The length of the waist strap can be shortened further by pushing
aside the small tab that holds the anchor clips in place and pull the
anchor clips out of their indentations © . Move the anchor clip to the
second or third loop in the strap © depending on the child's size.
CHECK that anchor clips are threaded properly. The ends of the
straps should be inserted into the slot as shown in picture ©.
Snap anchor clip into the seat indentations. Repeat on other side.
CHECK that straps are secure by pulling on them from the front of
the seat.
To Shorten Waist Straps for a
SMALLER Baby:
To Lengthen Waist Straps for a LARGER Baby:
Remove the anchor clip from the seat ©. Move the anchor clip to the
end of the strap. CHECK that the anchor clips are threaded properly
®. Snap anchor clips
back into seat as
shown inO. Repeat
on other side.
CHECK that straps are
secure by pulling on
them from the front of the seat.
ir
23