Graco SnugRide 1778253 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5. Snap harness clip pieces together O.
6. Pull on harness adjustment strap to
tighten straps as shown ©. CHECK that
both straps are flat and snug on
shoulders and thighs.
7. Position harness clip in middle of chest,
level with armpits and away from the
neck ©.
8. SAFETY CHECK:
a) MAKE SURE the top of the childs'
head is at least 1" below the top of the infant restraint
b) CHECK that harness straps are not twisted.
c) CHECK that the harness is snug. You should
not be able to pinch the harness if it
is snug. A snug strap should not allow any
slack. It lies in a relatively straight line without
sagging. It does not press on the child’s flesh
or push the child’s body into an unnatural
position ©.
26