Graco SnugRide 1778253 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1. Press handle adjustment buttons on both
sides of handle O
2. Rotate handle until it clicks into any of the
5 positions:
Position A: MUST be used
when carrying by handle,
Position B,C, D: are convenience
positions,
Position E: is the sitting position,
NEVER use position B or C in
the vehicle.
BOTH handle adjustment
buttons must pop out to lock
handle in place ©.
3. Push and pull on the handle to
be sure it is locked firmly in
position.
4.1 Adjusting Handle
o
0
4.2 Removing and Attaching Infant Restraint
To remove, squeeze release handle at back of
infant restraint and lift out of base as shown ©.
To put infant restraint in base, push infant
restraint down until it clicks into base. Pull up
on infant restraint to be sure it is latched
firmly into base.
16