0 0 o, B 0 0 0 0 – Uniden UBC3000XLT User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Signal Attenuation
You can use the Signal Attenuation feature
in the manual, search, or Scan Mode,
When the ATT indicator is on, the incoming
signal strength Is attenuated (reduced) by
about 14 dB. This prevents unusually strong
signals from over-loading the scanner.
In the Scan Mode, you must individually
program each channel you want to use the
Signal Attenuation feature.
In the Search Mode
1, Set the search limits and press @ ,
See “The Search Mode” on Page 27.
2. Turn Signal Attenuation on.
Press ■
0
0
©
®
©
0 0 o © ©
0
^ S
A
__ _ AM
U WFW
B 0 0 @ 0
»CUATT
138 88B.888
12.» KHf NFM
All signals are reduced during the search.
Press 0 again during search to turn off
Signal Attenuation for the Search Mode.
tn the Scan Mode
When the scanner stops on a channel:
0 0 © © ©
0 0 d"®“ ©
0 ^ 0 A
Press ■
AM MFU
HFU
B 0 0 0 0
P
31 H98.981
In the Manual Mode:
Turn Signal Attenuation on fora specific channel,
1
.
00 © ® ©
0 0 G ® ©
Press---- —0 B W 0 A
0 0 0 0 0
To change, press 0 again.
37