Uniden UBC3000XLT - Manual (Page 20)

6 . Select the bank(s).
It “FULL” appears, all 20 channels of
the bank are full. Select another bank.
Note: For banks 11 - 20, press SFT then
the appropriate number. (Example - SFT-1
for Bank 11.)
7. Begin searching.
0 0 © ® ®
0 0 O ® ©
B B V
__ AM NFW
0 0 0 0 0
IE ‘ 4 > 3^ tRCHA
m B88.88B
nj KHl NFU
Active frequency stored.
Search continues.
Press
AVTO MCHA
гг H08.3315.
ItJ EKt RFH
IE
tRCKA
888.888 RH.
11 .B KKE NEH
When all empty channels in the bank(s)
have been programmed, FULL appears
along with the last channel/frequency
programmed.
60 FULL
60 H53ms
If there are not enough active frequencies
found to fill the available empty channels,
the scanner continues searching until you
press A p Of
0 to manually stop
Auto-Store.
During Auto Store, you don’t hear audio
from the signals received and stored.
Auto Store will store every received
transmission. Be sure to review the
channels and delete any unwanted
frequencies.
16