Uniden UBC3000XLT User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

2. Select the channel.

- ‘The Manual Mode” on Page 32.
- “The Scan Mode" on Page 20.

Locking a Channel While Scanning

If the scanner keeps stopping on a particular

channel due to noise or too-frequent

transmissions, you may want to keep that

channel from scanning.

1. Wait until the scanner stops at the channel.

For more information, see

aAHn

SCAN

8 0

12.S KKi

H f U

2. Then:

The scanner immediately resumes scanning

because that channel is no longer in the

scanning sequence.

Unlocking a Channel

Note: Empty channels are automatically
locked. You cannot unlock an empty
channel.

1. Enter the Manual Mode,

Press ■

© ©

©"

&SAVE

B @

® ©

_ _ SffT

B G

® ©

Note: Because the channel is
locked-out, you cannot use the Scan
Mode to select it.