Adaptor jacks (kr-797), Connection of speakers (kr-797) – Kenwood KR-897 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

■

Connection of speakers (KR-797)

KFW97/KB-797 {En)

Powerd Center speaker

sub-woofer (8Q ~ 16Q)

Speaker systern

(Sn ~ 16QI

• Never short-circuit the + and - speaker cords. For the symptom and remedy when a speaker cord is shorted:
• If the left and right speakers are connected inversely or if the speaker cords are connected with reversed polarity, the sound becomes unnatural with

ambiguous acoustic irhage positioning. Be sure to connect the speakers and speaker cords correctly,

• Connect a sub woofer if you want to enhance the bass sound. The connected sub-woofer should be a power sub-woofer with a built-in amp.

ADAPTOR jacks (KR-797)

When an adaptor-type component such as a graphic equalizer is
connected, unplug the shorting pins from the ADAPTOR jacks and
connect the component to these jacks,

•When the ADAPTOR jacks are not used, be sure to plug the shorting

pins into jacks. Otherwise, the sound will not be produced,

•When the ADAPTOR jacks are used, retain the shorting pins and be

careful not to lose them.

• Never plug a shorting pin into other jacks than ADAPTOR jacks.

Otherwise, the unit may be damaged.