Kenwood KR-897 - Manual (Page 32)

A Caution -.Read this page carefully to ensure safe operation.
KR«g7/KR-797
(En)
Rated power output at the STEREO operation
120 watts per channel mipimum RMS, both channels
driven at 8 O, from 40 Hz to 20,000 Hz with no more than
0.8 % total harmonic distortion. (FTC|
Power output at the SURROUND operation
Front ________________ _______ _
120 watts per channel minimum RMS, both channels
driven, at 8 Q, 1 kHz with no more than 0.8 % total
harmonic distortion.
Total harmonic distortion
................................................................ 0.3 %(1 kHz, 55 W, 8 a)
Signal to noise ratio (IHF'66)'
PHONO (MM)............................................................................. 75 dB
LINE (CD)................................................................................... 93 dB
Input sensitivity / impedance
PHONO (MM).......................................................... 3.0 mV / 47 kO
CD........................................................................... 220 mV / 47 kO
Tone controls
BASS.................................................................. * 8 dB (at 100 Hz)
MIDDLE......................................................... . ± 8 dB (at 900 Hz)
TREBLE.............................................................. * 8 dB (at 10 kHz)
N.B. circuit................................................................ + 5 dB (80 Hz)
Output level / impedance
Sub woofer preout...................................................... 2.0 V / 600 il
Tuning frequency range.............................. .' 87.5 MHz - 108 MHz
Usable sensitivity '
MONO................................................ 1.3 pV (at 75 il) / 13.2 dBf
(75 kHz dev.. SINAD 30 dB)
50 dB quieting sensitivity
STEREO.............................................31.6 pV (at 75 Q) / 41.2dBf
Total harmonic distortion (1 kHz)
MONO ..................................... .«...f,,............ 0.5 % (65 dBf input)
STEREO..................................... ................... 0.6 % (65 dBf input)
Signal to noise ratio (1 kHz 75 kHz dev.)
MONO ......................................................... 75 dB (65 dBf input)
STEREO........................................................ 68 dB (65 dBf input)
Stereo separation (1 kHz) ......................................................... 40 dB
Selectivity (IHF ±400 kHz)........................................................... 66 dB
Frequency response.............. 30 Hz ~15 kHz, + 0.5 dB, - 3.0 dB
Tuning frequency rangé................................. 530 kHz ~ 1,700 kHz
Usable sensitivity (30 % mod.. S/N 20 dB)
......................................................................15 pV / (500 pV / m)
Signal to noise ratio (30 % mod., 1 mV input)......................... 48 dB
Power consumption................................................................. 1 6 0 W
A AC outlet
SWITCHED................................................ 1: (300 W, 2.5 A max.)
Dimensions............. ......................................W:440 mm (17-5/16")
H:127 mm (5")
. D;389mm (1.5-5/16")
Weight (net)............................................................... 9.0 kg (19.9 lb)
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
.. J 2 Full oerformance may not be exhibited in extremely cold locations (below 0 deg.C).
IBetesi
KENWOOD
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. Refer
to the model and serial numbers whenever you call upon your dealer for
information or service on this product.
Model Serial Number.