Kenwood KR-897 - Manual (Page 11)

KF^897/KR.737 (En)
SURROUND 3 STEREO
indiaw indjcstor
MEMORY iryJkatof
O POWER key
Press to switch the power ON artd OFF,
©STANDBY indicator
OSRS 3D indicator
Lights when the SRS 3D system is ON.
©SPEAKERS indicator
Lights when the speakers are ON.
©STEREO key -(^
Press to turn the surround mode OFF.
©DOLBY PRO LOGIC key
©DOLBY 3 STEREO key
©SRS 3D key
©INPUT SELECTOR knob
Rotate to select the input source.
©VOLUME CONTROL knob
©PHONES jack
Plug headphones into this jack.
-eg;
-cs:
©AUTO key
Press to select the tuning mode from the
auto tuning and manua I tuning modes. —
Press and hold the AUTO key for more than
2 seconds to switch the TAPEI display to
another input display.
©SPEAKERS key
Press to turn the speakers ON and OFF
©DIRECT key -C^
Press when tuning a broadcast station by
entering the digits of its frequencies.
©MEMORY key -¡S;
Press when registering a broadcast sta­
tion in the preset memory.
©Numeric keys (1 to 0, +10)
©BAND key -Q|;
Press to switch the broadcasting band.
©DISPLAY key
Press to switch the displayed information
between the surround mode display and
input selector display.
Press and hold the DISPLAY key for more
than 2 seconds to switch the display bright­
ness.
©TUNING keys ( v, A) -□£
Press to select a radio station.
©TAPE 2 MONITOR key
Press to monitor the sound being re­
corded. etc.
©N.B. key
Press to compensate for the insuffi­
ciency in the base sound.
©P.CALLkeyst V, A)
-122
Press to select one of the preset sta­
tions.
© SOURCE DIRECT key -[22
Press to listen to the source sound with
a higher sound quality.
About the STANDBY indicator
This unit has a STANDBY indicator, the lighting of which indicates that a small amount of current is supplied to back up the internal memory of the unit.
This status is referred to as the standby mode of the unit. In this mode, the power of the unit can be switched ON from the remote control unit.
When the unit is not to be used for a long period of time, unplug the power cord from the power outlet.