Connection of speakers (kr-897) – Kenwood KR-897 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
KM97/KH-797 (En)
Connection of speakers (KR-897)
Center speaker Powerd
(8Q ~ 16Q) sub-woofer
Speaker system A
(Sn - 16QI
R
L
Q®
Connect the speakers for use in
surround play to speaker sys
tem A.
Speaker system B does not out
put sound during surround play.
- -
lavcnM 1
iBHim. 1
§>
©
ELB—'
1
KMi
g) [Q
CMTEp/
UNEM
1
MAiyiH
+ B *
11
-E+l
I • - s
*1 For the operation of the
power amplifier (KM-897J,
refer
to
the
instruction
manual of the power am
plifier (KM-897).
Speaker system B
(8£i ~ 16iiJ
Surround speakers
(4n ~ SO)
The speakers connected to the KR-897 and
KM-897 reproduce sound as described below.
When surround play is used:
KR-897 SPEAKERS key; ON
KM-897 Key: D SURROUND
Speakers used for reproduction
: Speaker system A/Sub-woofer
; Center speaker/Surround speakers
Stereo play using the KR-897: Speakers used for reproduction
KR-897 SPEAKERS key; ON :
Speaker system A/Sub-woofer
KM-897 POWER key; 11 OFF ;
----------------------------------------------
Stereo play using the KM-897: Speakers used for reproduction
KR-897 SPEAKERS key: OFF ;
----------------------------------------------
KM-897 Key;
a.
STEREO :
Speaker system B
HEADPHONES play using only: Speakers used for reproduction
KR-897 SPEAKERS key: OFF ;
----------------------------------------------
KM-897 POWER key: Q OFF ;
----------------------------------------------
I For the installation and adjustment of speakers for surround play
»Never short-circuit the + and - speaker cords. For the symptom and remedy when a speaker cord is shorted.
.
»If the left and right speakers are connected inversely or if the speaker cords are connected with reversed polarity, the sound becomes unnatural with
ambiguous acoustic image positioning. Be sure to connect the speakers and speaker cords correctly.
• Connect a sub woofer if you want to enhance the bass sound. The connected sub-woofer should be a power sub-woofer with a built-in amp.