Kenwood KR-897 - Manual (Page 23)

KM97/KH-797 (En)
The surround modes allow you to enjoy the feeling of presence in music. Select the mode according to the source or components
played. For the connections of the surround and/or center speakers, refer to 'Connection of speakers'. -CX3
DOI£YPRO LOGIC surround mode
Video, DVD and LD software programs car­
rying the nnii«MrM«M«ii mark contain re-­
cording of the same Dolby Surround data as
those used in movie theaters.
The DOLBY PRO LOGIC surround mode uses
the Dolby Surround data and brings into
home a similar sound field with full of pres­
ence to movie theatres.
To use this mode, connect the surround
(and center) speakers.
In case center speaker is not used
.■ r.imvAm
w
ati-y.'.vM
DOLBY3 STEREO mode
If the left and right speakers are installed apart from each other,
the center acoustic image (words, etc.) may vary depending on
the listener's position. The DOLBY 3 STEREO mode provides an
improved posKioning of the center acoustic image regardless of
the listening position.
Use this mode when playing videotape, DVD or LD software
carrying the 1 1 imngrwrraMPi mark.
To use this mode, connect the center speaker.
Recommended speaker installation
Il is recommended that the surround speakers are Installed straight to the left and right of the listening position or slightly behind,
at a height of-about 1 meter higher than the listener's ears. Each surround speaker should be installed so that the longer sides are
horizontal.