Coleman 7700 LP Gas Series - Manual (Page 21)

Ц Ц Assemble the Electrode
Wire to the Electrode Tip
on the Side Fryer.
Ц Ц Assemble the Grease Pan
below the Fryer Burner.
Step
19
19-A
19-A. Attach the Electrode Wire to the Electrode Tip on the Side Fryer.
Electrode Tip
Route Wires through the
slot in the Fryer Panel.
Left
Side
Panel
19-B
19-B. Attach Fryer Grease Pan using four hooks located below the Fryer Burner.
Ц Ц NOTE: To attach the Fryer Grease Pan, raise the Pan slightly above the
hooks and drop into place. Do not bend the hooks while inserting or
removing the Fryer Grease Pan.
Fryer
Grease Pan
Hooks
21
Fryer
Panel
Electrode
Wire
Ground Wire pre-assembled
by the factory.