Coleman 7700 LP Gas Series - Manual (Page 11)

Ц Ц Assemble the Cart Spacer
to the Grill Cart.
Step
8
8-A. Assemble one Cart Spacer between the Left
and Right Panels using four Screws (TN).
Ц Ц NOTE: The Cart Spacer is assembled with
the flange down.
Ц Ц Tighten all fasteners.
Hardware shown actual size
(TN)
M6 x 15mm Screw
(4) Qty.
8-B
8-B. View of Cart Spacer properly assembled.
11
Ц Ц Assemble the Sliding Door
into the tracks from the rear
and set in the closed posi-
tion.
Ц Ц No tools required for this
step.
Step
7
7-A
7-B
7-C
7-D
7-A. Position the Sliding
Door as shown in 7-A.
7-B. Carefully align the
rollers with the bottom
door track. You will
need to raise the lead-
ing edge slightly to
clear the Door Stops
during assembly.
7-C. Continue pulling the
Sliding Door forward
until the Door stops at
the end of the Door
Track.
7-D. Carefully lower the
front edge of the
Sliding Door until it
touches the magnets
installed in Step 4.
The door is now in the
closed position.
8-A
View of Grill from Rear
Cart
Spacer TN (x4)
TN