Topstitching, Zipper sewing – Kenmore 385.15516 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Topstitching
(1) Stitch selector:
(2) Stitch length:
(t) Needle thread tension:
(4) Presser foot:
(5) Presser foot:
1 or 2
Red zone
2 to 6
Zigzag foot
Straight foot
NOTE;
When using the straight stitch foot, make sure to use
center needle position. Otherwise the needle may strike
the presser foot and possibly break.
Topstitching emphasizes lines of garments and keeps
seams and edges flat and crisp. Accent suits or blouses
with one or two rows of topstitching around the outer edges
of cuffs, lapels or collars. Lower the presser foot and keep
the edge of the fabric next to the right edge of the presser
foot.
Evenly guide the fabric along the edge to produce an even
row of topstitching 3/8” (1.0 cm) from the edge.
I
I
I PATTERN
I
LENGTH
@
“A
Zipper Sewing
® Stitch selector:
1
(2) Stitch length:
2
(3) Needle thread tension:
3 to 6
(4) Presser foot:
Zipper
foot
Fabric preparation
® Right side {Top side) of fabric
(2) End of opening
(3) Wrong side (Bottom side) of fabric
(
3
)
3/4" (2.0 cm)
Place right sides (Top sides) of fabric together and sew to
the end of the zipper opening @.
Reverse stitch to lock the stitches. Increase stitch length
to 4 and set needle thread tension at 0. Sew the zipper
opening with the basting stitch.
PATTERN
®
I
C J
III
fill-,
111-'
LENGTH
2
34