Kenmore 385.15516 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• Inserting bobbin
|T] Piace a bobbin in the bobbin case making sure thread
feeds clockwise coming from the bobbin.
a
1
Draw the thread through the slot of case.
] Continue to draw the thread under the tension spring
and through the opening.
Pull out about 4” (10 cm) of thread.
a Holding latch open, position the bobbin case into the
shuttle and release latch.
] Case should lock into piace when latch is released.
s
“A
22