Spool pins and caps, Converting to free-arm sewing, Spool pins and caps converting to free-arm sewing – Kenmore 17922 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SPOOL PINS AND CAPS
Place a spool of thread on the pin and place
the appropriate size spool cap over the
thread.
when sewing with a double needle. Pull it out
and place a nylon disc over it when using.
CONVERTING TO FREE-ARM SEWING
This machine can be used either as a flatbed
or as a freearm model. With the accessory
box in place, the machine is a flatbed model
with a large working surface, which slopes
gently towards you to help the smooth flow
of fabric.
By removing the accessory box, the machine
converts into a slim freearm model for sewing
children's
clothes,
cuffs,
trouser
legs,
armholes and other awkward places.
1.
To remove the accessory box, take it
firmly with your left hand and lift it up
until it clicks. Your machine is then ready
for free arm sewing.
2. To replace, slide the accessory box back
into place until it clicks.