beautypg.com

I2. starting to sewi – Kenmore 17922 User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

i2. STARTING TO SEWi

Now that you are familiar with the controls

on your machine and with the accessories
provided for the machine, you are ready to

stall to sew with your sewing machine.

Below are some good habits to follow each

time you sit down to sew:

1

.

3.

Check the needle-it should be straight,

properly set and sharp on the point.
It should be the correct size for the fabric

and thread being used. Do not be afraid
to change your needle frequently. Many
of the new fabrics made of synthetic
blends tend to dull the needles more
easily than fabrics made of natural fibers.

5.

2

. Before placing the material on the

machine, see that the ends of the threads

have been drawn about 3 - 4 inches to the
rear of the machine. Hold on to threads

during the sewing of the first 3 or 4
stitches of the seam.

4.

Test the machine stitch on a scrap of
fabric you plan to use. The fabric should

be double thickness. Adjust the machine

for the length of stitch and tension
suitable to your fabric.

Fabric should be placed under the presser

foot with the bulk of the material to the

left of the needle and the right edge of the
material placed on the 5/8" seam marking
on the needle plate when making a simple

seam.

Run.the machine at a slow even speed.

The more pressure you put on the foot

control, the faster the machine will sew.

Fasten each seam by back tacking at the
beginning and end of the seam.

7.

8

.

9.

Always finish sewing each seam with the
needle at its highest point.

Guide the fabric gently with your hand in

front of the needle. Never pull or hold the
fabric in such a way that the normal
feeding is altered.

When turning the hand wheel manually,
always turn it toward you.

)

26

This manual is related to the following products: