GE ZET958 - Manual (Page 41)

Before You Call For Ser\ice.
Wall Oven
Save time
& money!
Rm/imt the
tmiibleshooling tips
on the following
pages first and you
may not need to
cedi for servire.
PROBLEM POSSIBLE CAUSE
CEOCKAND TIMER
DO NOT WORK * A fuse in your home may be blown or the circuit breaker tripped.
Replace the fuse or reset the circuit breaker.
» Oven controls improjrerh’ set. See the Otrm Coniml, Clock and Timer
section.
OVEN LIGHT DOES
NOT WORK • Light bulb is loose or defective. Tighten or replace the bulb.
® Pad operating light is broken. Call for service.
OVEN
TEMPERATURE
TOO HOT OR
TOO COLD ® Oven thennostat needs adjustment. See the Adfiisl the Oven Thermostal
Do it vowr.Vi?//7 section.
OVEN WILL
NOT WORK » A fiise in your home may be blown or the circuit bteaker tripped.
Replace the fuse or reset the circtiii breaker.
» Oven controls improperly set.
FOOD DOES NOT
BAKE OR ROAST
PROPERLY ® Oven controls improjterly set. See the BaM.ng or Roasting section.
® Rack position is incorrect or the rack is not level.
® Incorrect cookware or cookware of improper size being used.
• Oven thennostat needs adjustment. See the
Adjust the Oven Thertnoslal
Do it yourself! section.
FOOD DOES NOT
BROIL PROPERLY ® Oven controls improperh' set. Make sure vou press the BROIL
HIGH/LOW pad. ' '
* Improper rack position being used. See the Broiling guide.
® Food being cooked in a hot jran. Use the broiling pan and grid that
came with your oven. Make sure that it is cool.
® Cookware not suited for broiling. Use the broiling pan and grid that
came with your oven.
• The probe is plugged into the outlet in the oven. Remove the probe
from the oven.
® Aluminum foil used on the bioiling ¡ran and grid has nor been fitted
properly and slit as recommended.
® In some areas the power (voltage) may be low. Preheat the broil
element for 10 minutes. Broil for the longest period of time
recommended in the
Broiling guuie.
OVEN WILL NOT
SELF CLEAN ® The oven tem|rerature is too high to set a self-clean operation.
Allow the oven to coo! and reset the controls.
• Oven controls improperly set. See the Using the Self-Cleaning Oven
section.
® The ¡rrobe is plugged into the outlet in the oven. Remove the probe
from the oven.
“CRACKING” OR
“POPPING” SOUND ® This is normal. It is the sound of the metal heating and cooling
during both cooking and cleaning functions.
EXCESSIVE SMOKING
DURING CLEAN
CYCLE ® Excessive soil. Press the CLEAR/OFF pad. Open the windows to rid
the room of smoke. Wait until the LOCKED light goes off.
Wipe up the excess soil and reset the clean cv'cle.
41