GE ZET958 - Manual (Page 12)

Special Features
Wall Oven
Fahrenheit
or Celsius
temperature
selection
Your oven conlrol is set to use the Fahrenheit
temperature selectums, but you may change this
to use the Celsius seketions.
1 Press the BAEJ: and BROIL HIGH/LOW
pads (on double oven models, use the upper
oven controls) at the same time for 3 seconds
until the display shows “SF.”
2 Press the BROIL HIGH/LOW and COOK
TIME pads at the same time. The display will
show “F” (Fahrenheit).
Press the BROIL HIGH/LOW and COOK
TIME pads again at the same time. This will
show “C” (Celsius).
3 Press the START pad. The new setting will be
displayed for both ovens.
NOTE: On double oven models, the new setting will
he displayed for both ovens.
Auto
conversion
When using convection hake, the A uto Recipe ''
Ckmversion feature will automatically convert entered
regukir hahing temperatures to convection hahing
temperatures.
Once the feature is cictivcitecl, the display -will show the
actual converted (reduced) temperedure. For example,
if you enter a regukir recipe temperature of 35(FF and
press the START pad, the display will show “CON”
and the converted temperature of “325°F”
NOTE: This feature does not convert convection bake
cooking times, only regular hahing temperatures.
To Activate the Feature:
1 Press the BAKE and BROIL HIGH/LOW
pads (on double oven models, use the upper
oven controls) at the same time for 3
seconds, until the display shows “SF.”
2 Press the CONV BAKE/1 RACK pad. The
display will show “CON OFF.” Press the
CONV BAKE/1 RACK pad again. The
display will show “CON ON.”
3 Press the START pad.
To deactivate the feature, repeat steps 1-3
above but press the START pad when “CON
OFF” is in the display.
12