GE ZET958 - Manual (Page 40)

Care and Cleaning
Oven
light bulbs
Wall Oven
NOTE: The ghss coxier should be removed only xvhen
cold. Wearing latex gloties may offer a heller grip.
CAUTION
: Before replacing the
bulb, disconnect electrical power to the oven
at the main fuse or circuit breaker panel.
Be sure to let the light cover and bulb cool
completely.
For c'our safety, do not touch a hot bulb with
bare hands or a damp cloth.
To remove:
1 Turn the glass corer counterclockwise
1/4 turn until the tabs of the glass cover
clear the grooves of the socket.
2 Using gloves or a dry cloth, remove the bulb
by jjulling it straight out.
To replace:
1 Use a new 130-volt Halogen bulb, not to
exceed 50 watts.
2 Using gloves or a dry cloth, remove the bulb
from its packaging. Do not touch the bulb
with bare fingere.
3 Push the bulb straight into the receptacle
all the wav.
4 Place the tabs of the glass cover into the
grooves of the soi
clockwise 1/4 turn. grooves of the socket. Turn the glass cover
For improved lighting inside the oven, clean the glass
rover frequently using a wet cloth. This should be
done when the oven is completely cool,
5 Reconnect electrical ¡rower to the oven.
Probe The temperature probe may be cleaned with
soap and water or a soa]>filled scouring ¡rad.
Cool the temperature probe before cleaning.
Scour stubborn spots with a soap-filled scouring
¡rad, rinse and diy.
Do not immerse the temperature probe in water.
Do not store the temperat ure probe in the oven.
4Н)