GE JGBP27DEMWW - Manual (Page 8)

Using the oven controls.
Throughout this manual, features and appearance may vary from your model.
o G o
O^en Controls
Temp Recall
Til ne Contri
o
)ls
l Timer
On/Off
M 00 00 A V OaD
On I Off
f^tearrT^
I Clean I
[cookin^l Start I
^Time^^Timel
O 0 Ò
Automatic 0 i/en
o
Oven Control, Clock and Timer Features and Settings
Ion some models!
0
Bake/Temp Recall Pad
Touch this pad to select the bake function.
Bake Light
Flashes while in edit mode—you can change the oven
temperature at this point. Glows when the oven is in bake
mode.
Start/On Pad
Must be touched to start any cooking or cleaning function.
Display
Shows the time of day, oven temperature, whether the
oven is in the bake, broil or self-cleaning mode and the
times set for the timer or automatic oven operations. The
display will show PRE while preheating. When the oven
reaches the selected temperature, the oven control will
beep and the display will show the oven temperature.
lf"F~" and a num ber or letter flash In the display and the oven
control signals, this Indicates a function error code.
If your oven was set for a tim ed oven operation and a power
outage occurred, the clock and all program m ed functions m ust
be reset.
The tim e of day will flash In the display when there has been a
power outage. Reset the clock.
If the function error code appears during the self-cleaning cycle,
check the oven door latch. The latch handle m ay have been
m oved, even If only slightly, from the latched position. M ake sure
the latch Is m oved to the right as far as It will go.
Touch the Clear/Off pad. Allow the oven to cool for one hour. Put
the oven back Into operation. If the function error code repeats,
disconnect the power to the range and call for service.
Kitchen Timer On/Off Pad
0
0
Touch this pad to select the timer feature.
Then press the + and - pads to adjust the timer.
Timer Light
Flashes while in edit mode—you can change
the set time at this point. Glows when the timer has been
activated. Flashes again when the time has run out until the
control is reset.
Clock Pad
To set the clock, press this pad twice and then press the +
and - pads. The time of day will flash in the display when
the oven is first
turned on.
Start Time Pad (on some models)
Use along with the Cooking Tim e or Self Clean pads to
set the oven to start and stop automatically at a time you
set.
Start Time Light
Flashes while in edit mode—you can change
the start time at this point. Glows when the function has
been activated.
Cooking Time Pad (on some models)
Touch this pad and then touch the + or - pads to set the
amount of time you want your food to cook. The oven will
shut off when the cooking time has run out.
Cooking Time Light
Flashes while in edit mode—you can change
the set time at this point. Glows when the function has been
activated. Flashes again when the time has run out until the
control is reset.