Dimensions and clearances, Installation instructions – GE JGBP27DEMWW User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation Instructions
DIMENSIONS AND CLEARANCES
Provide adequate clearances between the range and adjacent combustible surfaces. These dimensions must be
met for safe use of your range. The location of the electrical outlet and pipe opening (see Gas Pipe and Electric
Outlet Locations) may be adjusted to meet specific requirements.
The range may be placed with 0" clearance (flush) at the back wall.
For island installation, Model JGSS05, maintain 2-1/2 in. minimum from cutout to back edge of countertop and 3 in.
minimum from cutout to side edges of countertop.
Minimum to
cabinets on
either side
of the range
' 30"
30"
Minimum
Maximum
depth for
cabinets above
countertops
18"-
<-0" (minimum)
To cabinets below
cooktop and at the
range back
Height
Model
35"
JGSS05
45-7/8"
JGBS04
JGBS07
44"
RGB524
Height
45-1/8"
30
3
/
4
"
Depth with door closed (includes door handle)
29^/s"
Depth varies depending on model.
See specifications sheet for your model.
351/4" ±1/4"
Depth with door open
Glass door
45-3/8"
Porcelain door
45-1/4"
38