CLIFFORD AvantGuard 5.1 - Manual (Page 48)

45 © 2 0 0 6 d i re c t e d e l e c t ro n i c s — a l l r i g h t s re s e r v e d
7. Adjust Warn-away zone
z Press .
z Siren chirps 2 times.
z Sensor adjustment mode is entered.
z Hit vehicle at the desired level of impact.
z Sensor adjusts itself to the force of Hit.
z Siren chirps 1 time as confirmation of adjustment.
z Press to lock adjustment.
8. Press to re-enter Primary zone adjustment
z Siren chirps 2 times.
z Primary zone can now be re-adjusted as described in
step 4.
z Or press again to exit programming mode.
z The siren will chirp 3 times when sensor adjustment
mode has been exited.
nnoottee:: You must wait 15 seconds after arming for the omnisensor to
become active.