CLIFFORD AvantGuard 5.1 - Manual (Page 23)

20
table of zones
The zone number is the number of LED flashes used by the system to
identify a specific input. The standard input assignments are listed
below, along with spaces to write in any optional sensors or switches
you have had installed. If the Warning Zone response is triggered, the
LED will not report it.
anti-code grabbing (ACG)
This unit features Anti-Code Grabbing (ACG) with Random Code
Encryption. This means the receiver and transmitters each use a math-
ematical formula called an algorithm to change their code each time
the transmitter is used. This technology has been developed to increase
the security of the unit. The control unit knows what the next code
should be.
Zone - Number Dealer-Installed
of LED Flashes Description Options
1 Proximity sensor
2 Omnisensor
3 Mux 1 trigger - for optional
sensors
4 Door switch trigger
5 Instant trigger - trunk
6 Instant trigger - hood
7 Ignition trigger
8 Mux 2 trigger - for optional
sensors
9 BlackJax activation
10 Power interrupt