CLIFFORD AvantGuard 5.1 - Manual (Page 15)

12
transmitter chirp muting
To temporarily turn off the arm or disarm chirps, use transmitter chirp
muting. Simply press on the transmitter, and the confirmation
chirp(s) will be eliminated for that one operation only. The parking
lights will flash to confirm the arm/disarm command. If you want the
arm/disarm chirps turned off permanently, please refer to the User-
Selectable Features section of this guide.
transmitter sensor disable
To temporarily disable a sensor input, arm the system, press twice
and then . The lights will flash four times and all sensor warn
away zones are bypassed. Press the buttons again; the lights flash four
times and both warn away and full trigger sensor zones are bypassed
until the system is disarmed. This can be performed anytime the system
is armed.
1. Arm the system.
2. Press twice and then .
3. The lights will flash four times; all warn away zones are now
bypassed.
4. Transmit the sensor bypass channel again.
5. The lights will flash four more times; the sensor warn away
and full trigger zones are now bypassed.
6. The sensor zones will reset when disarmed.