CLIFFORD AvantGuard 5.1 - Manual (Page 20)

17 © 2 0 0 6 d i re c t e d e l e c t ro n i c s — a l l r i g h t s re s e r v e d
Doors are covered by FACT
II
differently; if the alarm is triggered by an
open door for three full cycles, the doors will be bypassed until the trig-
ger ceases. FACT
II
is programmable. See the Programming Options
section of this guide.
select siren sounds
To customize siren sounds, please refer to the selectable siren sounds
feature in the User Selectable Features grid. Once in programming
mode, press on the transmitter to begin playback of the avail-
able sounds.
Press on the PlainView 2 Valet switch while playing the desired
sound to add that sound; press while playing the desired sound to
delete that sound.
nnoottee:: Additional tones can be accessed through the CliffNet Wizard.
nnoottee:: Arming and disarming the system does not reset this function! The
only way to reset a bypassed zone is for 60 minutes or to turn on the igni-
tion. If testing your system, it is important to remember that the FACT II pro-
gramming can cause zones to be bypassed and appear to stop working.
If you wish to clear the FACT II memory, turn the ignition key on.