CLIFFORD AvantGuard 5.1 - Manual (Page 35)

32
PIN Code Confirmation Procedure
Begin this procedure within 15 seconds of finishing the programming
sequence or the new code will not be set.
1. Turn on the ignition.
2. Enter the new PIN code.
3. Press and hold for three seconds.
z LED turns on: New PIN code is learned and program-
ming is complete.
z LED stays off: New PIN code is not learned and the sys-
tem reverts to the old PIN code. Repeat the program-
ming sequence.
remote start
remote start features
z Remotely start your car’s engine from hundreds of feet away.
z Automatically performs extensive pre-start safety checks.
z Automatic cold weather cranking for hard-start conditions.
z Activates all preset accessories such as the heater or AC.
z Monitors RPM and shuts down the engine if problems are
detected.
z Clifford security system remains armed throughout.
z Automatically bypasses triggered security sensors.
z Automatically shuts down the engine if the alarm sounds.