CLIFFORD AvantGuard 5.1 - Manual (Page 33)

30
remote start
z This feature is only available with IntelliStart connected.
z The transmitter channel programmed into this feature will
activate or shut down the Intellistart remote start system.
window control
z This feature is only available with SmartWindows connected.
z The transmitter channel programmed into this feature will acti-
vate the vent or roll down feature of the SmartWindows system.
accessory c output
The transmitter channel programmed into this feature will activate the
accessory output.
clear all remotes
z This feature will erase all remote codes from the system
memory. This feature is convenient for erasing any transmit-
ters that have been lost, stolen, or incorrectly programmed
into the system.
z After entering this feature press any button on the transmit-
ter; the siren will chirp to indicate that all transmitters have
been erased from memory.