CLIFFORD AvantGuard 5.1 - Manual (Page 43)

40
4. Siren chirps 1 time as confirmation of BlackJax bypassed.
5. Turn Ignition Off, siren chirps 3 times as confirmation of exit-
ing programming.
To return to normal BlackJax Operation
1. Turn ignition on.
2. Enter Pin code.
3. Within 10 seconds press .
4. Siren chirps 2 times as confirmation of BlackJax active.
5. Turn ignition off, siren chirps 3 times as confirmation of exit-
ing programming.
blackjax off warning indicator
Each time the ignition is turned off when BlackJax is bypassed the LED
will blink 10 times as warning that the BlackJax has been temporarily
bypassed.
nnoottee:: If ignition remains on after entering PIN code and no action for 10
seconds, unit will automatically exit programming mode without chirps.
nnoottee:: If ignition remains on after entering PIN code and no action for 10
seconds, unit will automatically exit programming mode without chirps.