CLIFFORD AvantGuard 5.1 - Manual (Page 27)

24
number.
7. Exit programming - To exit programming mode turn the igni-
tion off or wait 60 seconds without pressing the PlainView 2
Valet switch. The siren will chirp three times to indicate pro-
gramming mode has been exited.
user selectable features
* This feature is only available with IntelliStart connected.
** This feature is only available with optional SmartWindows connected.
First
Press
Then
Press
Add new remote
(autolearn)
Set PIN code
(default = 2)
New remote learn
arm/disarm only
Auto (passive)
arm off/on
Select siren
sounds
New remote learn
accessory A channel
Chirps
off/on/quiet
FACT II off/on New remote learn
accessory B channel
Auto lock
off/ignition/rpm
Remote valet
off/on
New remote learn
silent mode
Auto unlock
off/ignition
Entry delay off/on New remote learn
remote valet
Auto (passive)
arm and lock
off/on
Reset to default
(except transmitter
and valet code)
New remote learn
remote start*
Siren duration
30/60/90
Panic off/on New remote learn
window down/vent**
Second unlock
off/on
Autostart setting*
(off/battery only/
temp only/
battery and temp)
New remote learn
accessory C channel
Not used BlackJax off/on Clear all remotes
nnoottee:: Refer to the Feature Descriptions sections of this guide for impor-
tant notes and descriptions of the system features and programming.