User selectable features descriptions - column one – CLIFFORD AvantGuard 5.1 User Manual
Page 28
25
© 2 0 0 6 d i re c t e d e l e c t ro n i c s — a l l r i g h t s re s e r v e d
user selectable features descriptions - column one
add new remote (auto learn)
Auto-learn new five-button remote controls to the system in the stan-
dard button configuration. Once you have entered the feature, press
on the transmitter until you hear a confirmation chirp.
auto (passive) arm - off/on
z
Off: The transmitter must be used to arm the system.
z
On: When the system sees the ignition turn off and the last
protected entry (door, hood, or trunk) close, it will begin a
30-second countdown before arming itself. After the first
five seconds, you will hear two chirps and the lights will
flash. The system will arm 25 seconds later.
chirps - off/on/quiet
z
Off: Chirps will not sound when arming/disarming the system.
z
On: Chirps will sound when arming/disarming the system.
z
Quiet: Chirps will sound when arming/disarming the system
but at a lower volume than normal.
auto lock - off/ignition/rpm
z
Off: The doors will not lock automatically.
z
Ignition: The doors will automatically lock three seconds after
the ignition is turned on unless a door is open at that time.
z
Rpm: The doors will lock when the system sees the engine
reach a preprogrammed RPM.