CLIFFORD AvantGuard 5.1 - Manual (Page 45)

42
Read the following instructions thoroughly for a full understanding of
how to properly adjust this sensor.
1. Disarm system
2. Transmit Channel 16 (Press 3-times then 1-
time)
z The LED will turn on and the siren will chirp 1-time.
z Primary (full trigger) zone adjustment has now been
entered.
z Primary zone can now be adjusted.
3. Adjusting Primary Zone
z Press of the remote control to increase sensitivity.
z Press of the remote control to decrease sensitivity.
z The sensor Primary zone can be tested at any time dur-
ing adjustment and will generate 1 siren chirp each
time the zone is activated.
4. Press to adjust Warn-Away zone
z Siren chirps 1 time.
z Warn-away Zone adjustment has now been entered.
z Warn-away Zone can now be adjusted.
5. Adjust Warn-away Zone
z Press to increase sensitivity.
z Press to decrease sensitivity.
z The sensor Warn-away zone can be tested at any time
during adjustment and will generate 1 siren chirp each
time the zone is activated.