Carl Goldberg GBGA1088 - Manual (Page 3)

3
Motor Mounts (2) pcs
(4) 8-32 x 1” Socket head bolts
(4) 8-32 x 1-1/4” Socket head bolts
(4) 8-32 T-nuts
(4) aircraft lock nuts
(12) #8 flat washers
Flying wires
(13’) braided cable (for flying wires and rudder pull-
pull.
(8) metal plates
(8) 2-56 rigging couplers (4 flying wires 4 rudder)
(12) cable swages (8 flying wires 4 rudder)
(3) 2-56x1/2” screws
(3) #2 flat washers
(3) 2-56 nuts
(4) 2-56 golden clevis
(4) metal clevis clips
(2) #2 x 1/2” sheet metal screws
Pushrods
(1) 8mm x 17” wooden dowel
(2) pcs shrink tube
(1) 5/32 x 19” plastic tube
(4) 2-56x 1-3/4” pushrods threaded both end(ailerons)
(2) 2-56 x 7-1/2” Pushrods threaded one end(elevator)
(1) 2-56 x 20” threaded one end ( throttle)-
(1) 2-56 x 6” rod threaded one end (elevator, servo
end)
(16) golden clevis
(16) metal clevis clips
(1) pushrod connector(throttle)
(16) 2-56 nuts
Wing attachment
(2) 8mm x 1-1/2” wooden dowels
(1) ply plate( mounting bolt reinforcement)
(2) 1/4” x 2” wing mount bolts
(2) 1/4” flat washers
Tail Wheel
(1) tail wheel bracket
(1) 1-1/4” tail wheel
(2) #6x 3/4” sheet metal screws
(2) #6 flat washers
(2) springs
(1) 6-32 x 3” threaded rod
(2) nylon adjustable horn bracket
(2) 1/8” wheel collars with set screws
Control Horns
(6) 6-32 x 2” machine screws(ailerons and elevator)
(1) 6-32 x 3” threaded rod(rudder)
(8) #6 flat washers
(8) #6 nuts
(10) adjustable horn brackets
Fuel Tank (500cc 16.91oz.)
(3) feet fuel line
(1)tank stopper
(3) brass tube
(1) tank clunk
Cowl Mount
(4) 4-40 x 3/4” socket head screws
(4) 1/4” long silicone fuel tubing.
(4) #4 flat washers
Miscellaneous
(21) CA hinges
(1) 1/8” x 24” nylon tubing
(1) 4” x 12” clear plastic