Carl Goldberg GBGA1088 - Manual (Page 20)

20
Belly pan
1. Mount the bottom wing in place.
2. Place belly pan in place and mark the outline
on the bottom of wing.
3. Remove belly pan and cut the covering away
1/16” inside the line you drew.
Do not cut the wood!
4. Glue the belly pan in place using epoxy. Be
careful not to get glue on the front or rear, just glue to
wing, so the wing will come off.
remove covering
5. Remove the covering over the wing mount
bolts access hole.
remove covering
NO GLUE