Braeburn 2200NC - Manual (Page 12)

Status Indicators
Status indicators appear in the display to let you know if your system is
heating, cooling or off.
HEAT
If flashing, indicates that your heating
system is running.
COOL If flashing, indicates that your cooling
system is running.
FILT Indicates that a service reminder has expired.
(see “Service Filter Monitor”, page 8).
Additional status indicators (Model 2200NC Only):
AUX Indicates that the auxiliary stage of heating is running
(multi-stage systems only) or that the emergency heating
system is running (heat pump systems only).
Program Event Indicators
Program Event Indicators appear in the display to let you know what part
of your current program is active. The 4 different program event indicators
are MORN, DAY, EVE and NIGHT.
MORN, DAY, EVE or NIGHT will flash if a temporary set point change is
made. The flash will stop at the next program event.
Note: MORN, DAY, EVE or NIGHT will not show while in HOLD Mode.
Resetting the Thermostat
This thermostat provides you with a reset button that will erase all of your
user settings and programming.
To reset the thermostat, use a small object such as a tooth pick or paper-
clip and gently press the button located inside the small hole on the front of
the thermostat housing labeled “reset”.
8 Additional Operation Features
Compressor Protection
This thermostat includes an automatic compressor protection delay to
avoid potential damage to your system from short cycling. This feature
activates a short delay after turning off the system compressor.
11