Braeburn 2200NC - Manual (Page 11)

7 Operating Your Thermostat
Setting the System Control Mode
The System Control has several modes of
operation that can be selected by moving the
SYSTEM switch to one of three positions.
COOL Only your cooling system will operate
OFF Heating and cooling systems are off
HEAT Only your heating system will operate
Additional System Control Mode (Model 2200NC Only):
EMER Operates a backup heat source (Emergency Heat) for heat pump
systems only
NOTE: If your model 2200NC was set to a
conventional system (NORM) then you will
not have the EMER (emergency heat) option
and “NO AUX SET” will flash in the display if
EMER is selected with the system switch.
Setting the Fan Control Mode
The Fan Control has 2 modes of operation – AUTO and ON. The mode can
be selected by moving the FAN switch.
AUTO The system fan will run only when your
heating or cooling system is running
ON The system fan will stay on.
Temperature Adjustment
Temporary Adjustment – Press and hold the or button to adjust the
current set point temperature.
Extended Adjustment – Press the HOLD button so that HOLD appears in
the display screen. Press or to adjust the current set temperature
(See “Extended Hold Period”, page 8).
10