Avlink VX-2088 - Manual (Page 25)

VX Matrix Switching System—User Manual
24
The final results will be as shown in Figure 7-3 below:
Figure 7-3
7.0.2.3 Select all output, DeSelect all output Switching Functions
（1）Select all output Function Description: You can use this function to select one port for input
and all output ports for output.
A specific example of operation is described below:
Example: Now, you have a VX-2088 matrix with all input and output ports properly
connected to the equipment. The needed input/output ports should be set to video channel 1
while switching all output ports to output.
Press the Select all output key and select the input number key 01. Click on the matrix icons
along the 01 row to turn them into to complete the command operation.
（2）DeSelect all output Function Description: It is used to close the Select all output function.
7.0.2.4 Disconnect all Command
Function Description: To close all the switching methods.
Press the “Disconnect all” key to close connection to all input and output ports.
7.0.2.5 Memory Function Usage
Function Description: To store and retrieve.
Store Function Description: The Store Function saves all the present input/output
switching relations to any Locations from #1 to #8 you desired.
A specific example of the Store Function is described below: