Avlink VX-2088 - Manual (Page 21)

VX Matrix Switching System—User Manual
20
Example 2: Operation for synchronously switching video signals from NO.4 channel to NO.1, 3,
5 and 6 output channels.
Key LCD Display
Operation
1. Press the NO.1 key of output
channel for 2 seconds. Enter the
input channels when the red 0 on
LCD flickers.
2. Press the NO.4 key of the
input channel for 2 seconds to
select operation of input from
NO.4 channel and output from
NO.1 channel. Enter the output
channel when VIDEO shows 4 at
NO.1 channel on LCD.
3.Press the NO.3 key of the
output channel for 2 seconds and
enter the input channel when the
red 0 on LCD flickers.
4.Press the NO.4 key of the input
channel for 2 seconds to select
operation of input from NO.4
channel and output from NO.1
and NO.3 channels. Enter the
output channel when VIDEO
shows “4” at NO.1 and NO.3
channels on LCD.
5.Press the NO.5 key of the
output channel for 2 seconds and
enter the input channel when the
red 0 on LCD flickers.
6.Press the NO.4 key of the input
channel for 2 seconds to select
operation of input from NO.4
channel and output from NO.1, 3
and 5 channels. Enter the output
channel when “4”shows at NO.1,
3 and 5 channels on LCD.