ALTANA BYK-mac i COLOR Manual - Manual (Page 9)

8
Safety instructions
b) by disconnecting the power supply unit plug from
the socket
The power supply unit can be disconnect from the
power supply by disconnecting the power
connection line plug from the socket. Make certain
that the power supply unit plug is easily accessible.
Use only the power supply connection line included
with delivery.
• When working with the batteries and the
rechargeable battery pack, make certain there is
no short circuit on the contacts (e.g. due to
damaged insulation). Metallic objects must not
come in contact with the bare contacts.
WARNING severe material damage
• The measurement unit consists of sensitive
optical and electronic precision parts. Prevent it
from being dropped, bumped or shaken!
• Avoid exposure to continuous humidity and
condensation. Avoid splashing with water,
chemicals or other liquids.
• Please use only accessories that are available
for the unit.
• Only devices that meet the requirements for low-
voltage safety may be connected to the USB
interface.
CAUTION material damage
• Do not allow any foreign objects to get into the
measurement opening.
• Do not expose the unit to direct sunlight for
extended periods of time. Do not store it in a hot
or dusty environment. Use the instrument case
for storage.