ALTANA BYK-mac i COLOR Manual - Manual (Page 26)

25
8. Measure
Select the menu item Measure by pressing the
operate button/scroll wheel.
A selection menu appears.
”Continue last series”: To continue the last test
series. If no series is stored, it will be created.
”Absolute”: To measure absolute data.
”Difference”: To measure differences. Select an
existing standard, create a new one or use the
function „Auto Standard“.
”car_01”: To take readings according to a predefined
measurement sequence (organizer).
8.1 Continue last series
”Continue last series” leads you directly to the
measuring sequence of the last series. Press
operate to start the reading.
Measure