ALTANA BYK-mac i COLOR Manual - Manual (Page 45)

44
Setup
11.2 Instrument
In the Setup menu you find functions to adjust
general settings of the instrument:
11.2.1 Sample curvature
You can adapt the sensitivity of the pins dependent
on the sample curvature.
Flat: 4 pins < 0.1mm
Low: 3 pins < 0.1mm, 1 pin < 0.3mm
Medium: 3 pins < 0.3mm, 1 pin < 0.9mm
High: 3 pins < 0.6mm, 1 pin off
Off: pins are deactivated, but it is ensured
that no ambient light will enter the
aperture.
11.2.2 Automatic measurement
The instrument can be set-up to execute a reading
by just pressing the four pins.
When the automatic measurement is activated, a
checkmark appears.