ALTANA Micro-TRI-Gloss μ - Manual (Page 55)

54
English
19 Interface
The measurement device is
equipped with a serial interface
that allows for direct
communication with a PC.
Measurement data can be transfer-
red from memory or directly after
each measurement.
The easy-link program is included
with delivery for this purpose. Your
transferred data is displayed
immediately in a test report.
You can make the connection to
your PC with the enclosed PC
cable. Plug the side with the flat
connector (designed so it can only
be connected with the correct
polarity) into the measurement
device and the 9-pin sub-D plug
into the PC.
A USB adapter is also available.
You will find ordering information
ordering in the delivery notes.
Please also note the section
Commissioning and power supply
when operating the device with an
external plug power supply.