ALTANA Micro-TRI-Gloss μ - Manual (Page 47)

46
English
You can set the scales of the
measurement values for gloss and
thickness separately.
Scale Gloss
You can use the Scale menu option
to switch back and forth between
Gloss Units and Reflectance (see
the Section on Practical measuring
suggestions). Move the mark to the
desired entry and press mode. A
check mark identifies the Scale
that is selected. After you switch
the Scale, the unit must not be
recalibrated.
Scale Thickness
You can use the Scale menu option
to switch back and forth between
—m and mil. Move the mark to the
desired entry and press mode. A
check mark identifies the Scale
that is selected.
15 Calibration and Autodiagnosis