ALTANA Micro-TRI-Gloss μ - Manual (Page 28)

27
English
Geometry/Sensor 12
In this menu, you can select the
geometry for the gloss measure-
ment, just as the sensor for the film
thickness measurement.
Geometry selection:
Choose Gloss Geometry from the
Geometry/Sensor menu.
You can choose between the
representation of one, two or all
three geometries in the display.
The currently set angle
combination is indicated in the
Geometry menu by a check mark.
Select the desired combination
with the scroll wheel and then
confirm by pressing mode.
When Save is turned on, switching
the geometry automatically causes
the program to switch to the
appropriate predefined area of
memory.