ALTANA Micro-TRI-Gloss μ - Manual (Page 27)

26
English
11 Basic mode
The selection options are limited to
the most essential in basic mode.
This also greatly simplifies
operation in this mode.
You can select geometry and
thickness sensor and perform
calibration. In addition, all functions
in the Setup menu item are
available.
Basic mode is useful if you want to
interrupt a series of measurements
and quickly perform some other
measurements in the middle
without leaving the series of
measurements.
Once these other measurements
are complete, you can use
to return to the point where you
interrupted the series of
measurements.