Acura 2014 TL - Navigation Manual - Manual (Page 41)

Entering a Destination
40 Navigation System
NOTE:
Information icons are displayed at
scales from 1,6 kilometres to 400
metres, POI icons are displayed at 200
metres or less, and roads are displayed
at 400 metres or less.
When you fi nd the desired address,
press on the Interface Dial again. If
it is not the desired address, change
the location of the target mark with
the Interface Dial. Push in on the
Interface Dial again to display a new
address.
If you select a single icon or a section
of road within the target mark, the
following screen appears. Select Set
as Dest. and calculate the route for the
destination that you selected.
By Intersection
After you select Intersection from
the DEST screen (Dest. MENU 2), the
display changes to:
To select an intersection outside the
province you are currently in, select the
province. For details of how to select a
province, see Selecting the Province or
State on page 24 .
Next, select the city where the
intersection is located. For details of
how to select a city, see Selecting the
City on page 25 .
Last, select the two streets which
intersect. For details of how to select a
street, see Selecting the Street on page 26 .
If the two streets that you have selected
do not intersect, no intersection will
appear.
Tip:
When entering an address, it is usually
easier to enter the street fi rst. A city
or cities that the street appears in will
be displayed. For your convenience,
you do not have to enter both city and
street.
NOTE
• If you fi nd that your city is not
listed, it may be part of a larger
metropolitan area. Try entering the
street fi rst.
• Prior to departure, you can set areas
to avoid. The system then includes
them in its calculations for the
destination you have entered. See
Edit Avoid Area on page 98 .