Cabletron Systems WPIM-RT1 - Manual (Page 46)

Appendix A: Specifications
A-2 WPIM-RT1 User’s Guide
A.4 T1 INTERFACE CABLING
Table A-1 lists Cabletron Systems part numbers for the interface cables. A
standard 20-foot cable is available or the length of cable may be specified
when ordering.
A.4.1 Cable Assemblies and Pinouts
The following section provides connector information for the T1 interface
cable.
Table A-1 Cabletron T1 Cable Part Numbers
Interface Cable Cabletron Part Number
T1 Line Interface Cable 9372094-20 1
1. Standard 20-foot T1 Line Interface Cable.
9372094-L
2
2. L denotes length required in feet or meters. For example: 9372094-3
denotes a 3-foot cable; 9372094-3M denotes a 3-meter cable.
Table A-2 T1 Connector Information
Cabletron interface cable part number 9372094
Description T1 line interface cable
Connector 1 RJ48C
Connector 2 RJ48C
Table A-3 T1 RJ48 Connector Pin Assignments
Pin Signal
1 Receive Ring
2 Receive Tip
3 Not Used
4 Transmit Ring
5 Transmit Tip
6 Not Used
7 Shield Ground
8 Shield Ground