beautypg.com

KEYENCE CV-X Series User Manual

Page 5

background image

‐ 5 ‐

www.keyence.com

KEYENCE CORPORATION. Vision System Division

5

Restart both the CV-X Series and the MELSEC FX Series.

If "Initializing PLC- Link..." appears on the lower left of the screen and
disappears immediately, it indicates that the link has been established
successfully.
If the link establishment has failed, the message "Initializing PLC- Link...
*"
appears repeatedly, and the error message "Failed to establish a link
with the PLC"
appears.
Check the settings of the CV‐X Series and MELSEC FX Series again.

* Start the MELSEC FX Series first, and then start the CV‐X Series.

4

Select [Online] > [Write to PLC], and press "Execute" to connect to PLC.