Tare, Contnt, Header – Holtgreven Ohaus Defender Series Bench Scales User Manual
Page 35: User.id, Proj.id, Scal.id, Dat.tmm

7000 Series Indicators EN-33
ON
ON
ON
ON
ON
ON
Tare
Set the status.
OFF
= the tare weight is not printed.
ON
= the tare weight is printed.
2.000 kg T
Header
Set the status.
OFF
= the user defined header is not printed.
ON
= the user defined header is printed.
USER DEFINED TEXT
USER DEFINED TEXT
USER DEFINED TEXT
USER DEFINED TEXT
USER DEFINED TEXT
NOTE: The header information must be defined using the H x “text” interface command. Refer to Section 5.1.
User ID
Set the status.
OFF
= the User ID value is not printed.
ON
= the User ID value is printed.
User Id: XXXXXXXXXXXX
Project ID
Set the status.
OFF
= the Project ID value is not printed.
ON
= the Project ID value is printed.
Project Id: XXXXXXXXXXXX
Scale ID
Set the status.
OFF
= the Scale ID value is not printed.
ON
= the Scale ID value is printed.
Scale Id: XXXXXXXXXXXX
Date-Time
Set the status.
OFF
= the time and date are not printed.
ON
= the time and date are printed.
01/31/08 12:30 PM
tArE
OFF
CONtNt
TARE
HEAdEr
OFF
CONtNt
HEADER
USEr.Id
OFF
CONtNt
USER ID
PrOJ.Id
OFF
CONtNt
PROJECT ID
SCAL.Id
OFF
CONtNt
SCALE ID
DAt.tmM
OFF
CONtNt
DATE-TIME